New stabilized ground circuit

The AU-X117 is designed to let you enjoy digital sound to the fullest. Reasons are highspeed power transistors, an elaborate power-amp configuration, our new stabilized ground circuit, large electrolytic capacitors and a large-capacity transformers used in the power supply. The amp has a power output of 40 watts per channel at 8 ohms and 47 watts per channel at 4 ohms (DIN). But on a more realistic dynamic basis, it delivers much more — dynamic power of 55 watts at 8 ohms and 70 watts at 4 ohms. It's an assurance that every additional dB you gain from a CD is yours to enjoy.

"CD Direct" switch

The "CD DIRECT" switch on the AU-X117 permits a CD input to route directly to the volume control and then the power amp, entirely skipping the input selection circuit, tone control circuit and balance circuit. This allows you to enjoy pure digital sound. #6 inputs with LED indicators: PHONO, TUNER, LINE, CD, TAPE-I/DAT, TAPE-2 ADAPTOR • Listening to CD while recording another program •Gold-plated headphone output •Connections for two pairs of speaker systems (A, B, A+B)

 

 

Specifications:   
• Power Output (DIN):  47Wx2 (4 ohms), 40Wx2 (8 ohms) 
• Continuous Power:  30Wx 2 (20Hz - 20kHz, 0.03%T.H.D.) (8 ohms) 
• Total Harmonic Distortion:  less than 0.03% 
• Frequency Response (from AUX, OVERALL):  10Hz - 70kHz (+ldB/-3dB) 
• Signal-to-Noise Ratio:   More than 78dB (MM, PHONO), More than 105dB (CD, TUNER, TAPE)
• Dimensions (WxHxD):  430x125x286mm 
• Weight:  5.0kg